AMP 90202-2 HAND CRIMP TOOL. AMP hand crimp tool, Model 90202-2. Applicable wire size: 20 - 30 AWG. This tool is designed for crimping the AMPMODU MOD IV 1/2 and MOD V loose-piece (LP) contacts.
The front (contact side) of the tool has the tool number marked on it. The back (wire side) of the tool has the wire size marked above each crimp section. This tool features two fixed dies (crimpers), two moveable dies (anvils), an insulation crimp adjustment lever, a contact support, a wire hold-down, a locator/insulation stop, an ejector and a CERTI-CRIMP ratchet.
The insulation crimp adjustment lever is used to regulate the crimp height of the contact insulation barrel. The contact support prevents the contact from bending during the crimping procedure.
The wire hold-down forces the wire to the bottom of the wire barrel during crimping of the contact in the "30-26" crimping section. In use, it rests in the wire hold-down slot. The locator/insulation stop has two functions. First, it positions the contact between the crimping dies, and secondly, it aids in locating the wire in the contact. In use, it rests in the contact locator slot.
The ejector pulls the locator down and ejects the crimp contact when the tool handles are fully opened. The CERTI-CRIMP ratchet ensures full crimping of the contact.
Once engaged, the ratchet will not release until the handles have been fully closed. The crimping dies bottom before the CERTI-CRIMP ratchet releases. This design feature ensures maximum electrical and tensile performance of the crimp. Do not re-adjust the ratchet. [Full data-sheet & instructions included].Tool Dimensions: 300mm x 65mm x 20mm Weight: 570g. Tel: 023 80866377 Vat Registration No. This item is in the category "Business, Office & Industrial\Hand Tools\Electrical Tools\Hand Crimpers & Strippers". The seller is "series4clearanceseries4limited" and is located in this country: GB. This item can be shipped worldwide.