AMP Hand Crimp Tool Model: 90296-2. Applicable wire size: 14 - 20 AWG.This tool features two fixed dies (crimpers), two movable dies (anvils), an insulation crimp adjustment lever, a contact support, a locator/insulation stop and a CERTI-CRIMP ratchet. The insulation adjustment lever is used to regulate the height of the crimp of the contact insualtion barrel. The contact support prevents the contact from bending during the crimping procedure.
The locator/insulation stop has two functions; firstly it positions the contact between the crimper and anvil before crimping. Secondly; it limits the insertion distance of the stripper wire into the contact. In use, it rests in the locator slot of the contact.
The CERTI-CRIMP ratchet design ensures full crimping of the contact. Once engaged, the ratchet will not be released until the handles are fully closed, to prevent partial crimps. The crimping dies bottom before the ratchet releases. This is a design feature that assures maximum electrical and tensile performance of the crimp. The front of the tool, into which the contact is inserted, has the tool number marked on it.
The back of the tool (wire side), into which the wire is inserted, has the wire size marked above each crimp section. Tool Dimensions: 300mm x 65mm x 20mm Weight: 570g. Tel: 023 80866377 Vat Registration No. This item is in the category "Business, Office & Industrial\Hand Tools\Electrical Tools\Hand Crimpers & Strippers".The seller is "series4clearanceseries4limited" and is located in this country: GB. This item can be shipped worldwide.