AMP 90300- HAND CRIMP TOOL. AMP Hand Crimp Tool, Model: 90300- Applicable wire size: 24 - 18 AWG.This tool is designed for crimping AMP universal MATE-N-LOK and Universal MATE-N-LOK II loose-piece (LP) pin and socket contacts. The tool features two fixed dies (crimpers), two movable dies (anvils), an insulation crimp adjustment lever, a contact support, a locator/insulation stop and a CERTI-CRIMP ratchet.
The insulation adjustment lever is used to regulate the crimp height of the contact insulation barrel. The contact support prevents the contact from bending during the crimping procedure. The locator/insulation stop has two functions; firstly it positions the contact between the anvil and crimper before crimping. Secondly, it limits the insertion distance of the stripped wire into the contact.
In use, it rests in the locator slot of the contact. The CERTI-CRIMP ratchet assures full crimping of the contact. Once engaged, the ratchet will not release until the handles are fully closed.
The crimping dies bottom before the CERTI-CRIMP ratchet releases. This is a design feature that assures maximum electrical and tensile performance of the crimp.
The front of the tool, into which the contact is inserted, has the tool number marked on it. The back of the tool (wire side), into which the wire is inserted, has the wire size marked above each crimp section.
Full data-sheet & instructions for the 90300-2 only. Data-sheet for the 90300-1 is no longer accessible. Tool Dimensions: 290mm x 80mm x 20mm Weight: 600g. Tel: 023 80866377 Vat Registration No. This item is in the category "Business, Office & Industrial\Hand Tools\Electrical Tools\Hand Crimpers & Strippers".
The seller is "series4clearanceseries4limited" and is located in this country: GB. This item can be shipped worldwide.