Before feeding the wires, please cut off the head of the wires, to avoid gaps caused to the blades. On the output side, if the cuts on the wires are too deep, please check below points: Please adjust the handles on the input side, screw down or loose them. (M12 handles) Check whether the wires on the right position as you feeding them.
Make sure the blades are sharp, if not, polish them with the oil stone. On the output side, if see the plastic(PVC)has been stripped, but the copper wires can not been disgorged, please check below 4 points: Polish the axis of the upside with the oil stone.
Check whether the springs are loose, if yes, screw down to make them tighten. The diameter of the wires are too small, please adjust the space between the two axises to 0.3-0.6mm. If the wires you want to strip are hot, also can not get the copper wires stripped out.If the wires were blocked in the axises, please check below points: If the springs on the press wheels are too tight, loose them. There are too much oil on the cables/wires, please wipe it. If see the blades tilted: Check whether the center adjuster was loosed. Centering adjustment and adjust the screws of two sides of it. Package Included: - 1 x Wire Stripper - 1 x Manual. If not, we will close the transcation. For International buyers , please note: a. The item "Portable 370W Powered Electric Wire Stripping Machine 10 Blades Metal Cable 220V" is in sale since Wednesday, March 28, 2018. This item is in the category "Business, Office & Industrial\Hand Tools\Wire Strippers & Cutters".
The seller is "rcshop2011" and is located in Portsmouth. This item can be shipped worldwide.