370W Portable Powered Electric Wire Stripping Machine Stripper 10 Blades Metal Cable Features: - 11 holes and 10 blades for easy access to any kind of cable or wire from the smallest to the largest - The professional device works even where conventional grip procedures fail - 11 different guides guarantee the machining of all types of cable with variable diameter from 1 mm to 40 mm - Do not waste time with other models of slotting machines where you need to adjust the blade every time you change the diameter of the cable - This machine automatically adjusts itself - Among these guides we have the ability to work flat and rigid cables - This machine is also ideal for industrial use - The blades and rollers rotate together at the same time by means of the gear so that the cable does not slip - The springs are adjustable to give the right cutting pressure Specification: - Power: 0.37kw - Voltage: 220V - Net weight: 38kg/84lbs - Dimensions: 58X28 X37cm/23X11X14.5inch - Cable diameter: DA 1.5 mm - DA 38 mm/DA 0.06inch - DA 1.5inch - Cutting speed: 15 m/min - G. Comparing the wiresdiameters with the feeding holes on the machine, feeding the wires one piece at one time.Before feeding the wires, please cut off the head of the wires, to avoid gaps caused to the blades. On the output side, if the cuts on the wires are too deep, please check below points: Please adjust the handles on the input side, screw down or loose them. (M12 handles) Check whether the wires on the right position as you feeding them. Make sure the blades are sharp, if not, polish them with the oil stone.
On the output side, if see the plastic(PVC)has been stripped, but the copper wires can not been disgorged, please check below 4 points: Polish the axis of the upside with the oil stone. Check whether the springs are loose, if yes, screw down to make them tighten. The diameter of the wires are too small, please adjust the space between the two axises to 0.3-0.6mm.If the wires you want to strip are hot, also can not get the copper wires stripped out. If the wires were blocked in the axises, please check below points: If the springs on the press wheels are too tight, loose them. There are too much oil on the cables/wires, please wipe it.
If see the blades tilted: Check whether the center adjuster was loosed. Centering adjustment and adjust the screws of two sides of it. Package Included: - 1 x Wire Stripper - 1 x Manual.The item "370W Powered Electric Wire Stripping Machine 10 Blades Metal Cable Portable 220V" is in sale since Wednesday, August 22, 2018. This item is in the category "Business, Office & Industrial\Hand Tools\Wire Strippers & Cutters". The seller is "trustinchina" and is located in Portsmouth. This item can be shipped worldwide.