Before feeding the wires, please cut off the head of the wires, to avoid gaps caused to the blades. On the output side, if the cuts on the wires are too deep, please check below points. Please adjust the handles on the input side, screw down or loose them.
Check whether the wires on the right position as you feeding them. Make sure the blades are sharp, if not, polish them with the oil stone. On the output side, if see the plastic(PVC)has been stripped, but the copper wires can not been disgorged, please check below 4 points.
Polish the axis of the upside with the oil stone. Check whether the springs are loose, if yes, screw down to make them tighten. The diameter of the wires are too small, please adjust the space between the two axises to 0.3-0.6mm.If the wires you want to strip are hot, also can not get the copper wires stripped out. If the wires were blocked in the axises, please check below points. If the springs on the press wheels are too tight, loose them. There are too much oil on the cables/wires, please wipe it. If see the blades tilted. Check whether the center adjuster was loosed. Centering adjustment and adjust the screws of two sides of it. Make sure the wiresdiameter are similar with the feeding holes, large wires in large feeding holes, small wires in small feeding holes, flat wires in flat feeding holes. 11 holes and 10 blades for easy access to any kind of cable or wire from the smallest to the largest. The professional device works even where conventional grip procedures fail. 11 different guides guarantee the machining of all types of cable with variable diameter from 1 mm to 40 mm. Do not waste time with other models of slotting machines where you need to adjust the blade every time you change the diameter of the cable. This machine automatically adjusts itself. Among these guides we have the ability to work flat and rigid cables. This machine is also ideal for industrial use. The blades and rollers rotate together at the same time by means of the gear so that the cable does not slip.
The springs are adjustable to give the right cutting pressure. Cable diameter: DA 1.5 mm - DA 38 mm/DA 0.06inch - DA 1.5inch.
We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. If you have any changes, pls inform us. 7:00am-13:00pm (Berlin Time).These charges are the buyers responsibility. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within 12-24hours. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault. A: The item ships from. A: Please log on your account. Q: How do I return an item? Please contact our customer service before you return an item. The item "370W Powered Electric Wire Stripping Machine 10 Blades 220V Industrial 1.5-38mm" is in sale since Monday, June 24, 2019. This item is in the category "Business, Office & Industrial\Hand Tools\Wire Strippers & Cutters".
The seller is "businessproductseller" and is located in Mouscron. This item can be shipped to all countries in Europe.